Premium Slow Set EPDM Binder (4-6 Hour Cure)

4-6 HOUR CURE – 25Kg

Epoxy Effects Slow Setting EPDM Binder is a single component moisture curing polyurethane binder. The curing time is approximately 4 to 6 hours at a temperature of 25°c and a relative humidity of 50%.

£86.62 (£103.94 incl VAT)

Safety & Technical Information:

You must read the essential safety and technical data before storage and use of these products.

4-6 HOUR CURE – 25Kg

Epoxy Effects Slow Set EPDM Binder is a single component moisture curing polyurethane binder. The curing time is approximately 4 to 6 hours at a temperature of 25°c and a relative humidity of 50%.
If used at lower temperatures and humidity the cure time will be considerably extended, so use of ALIPHATIC ACTIVATOR 0613 may be required to shorten cure times.

The product should only be used between the temperatures of 5°c and 25°c. Primarily used for laid in situ bound SBR and EPDM screeded safety surfaces, Epoxy Effects Slow Set Binder exhibits excellent adhesion to most rubber granulates and gives a strong performance in both tensile strength and durability. Epoxy Effects Slow Set Binder is also used in the manufacture of rubber safety tiles, rubber mats and moulded rubber products.

Product Videos